PRONAR T743, Operator'S Manual

Page: 33 / 150

Pronar T743 SECTION 2
2.8
FIGURE 2.2 Mounting place for slow-moving vehicle sign
(1) warning sign, (2) attachment point
2.1.5 TYRES
•
After removing a wheel, always check how firmly the nuts are screwed in.
Inspection should be carried out each time after first use, after first travel with load
and then every 6 months of use or every 25,000 km. In the event of intensive
work checking the nut tightening should be done at least every 100 km. The
inspection should be repeated individually if a wheel has been removed from the
wheel axle.
•
When working with tyres, the trailer should be immobilised with parking brake and
secured against rolling by placing chocks under wheel. Wheels can be taken off
the trailer axle only when the trailer is not loaded.