PRONAR T743, Operator'S Manual, Page: 118 / 150

SECTION 5 Pronar T743
5.19
F – chain grease
Trailer lubrication should be performed with the aid of a manually or foot operated grease
gun, filled with generally available permanent grease based on lithium or lime soap. Before
commencing lubrication insofar as is possible remove old grease and other contamination.
After lubricating the machine according to instructions, wipe off excess grease.
Gear wheel transmission should be lubricated with gear oil according to classification
SAE90 EP. Oil changing is discussed in further on in this section.
Before commencing lubrication of gear chains, first wash them with generally available
substances for this purpose. After complete drying, grease chains using a brush. After
completing lubrication do not use the trailer for at least 1 hour.
Parts, which should be lubricated with general-purpose machine oil, should be wiped with
a dry cleaning cloth and then a small quantity of oil should be applied to surfaces (with oil can
or brush). Wipe off excess oil.
Thoroughly wash accumulated deposits off parabolic leaf springs and then after drying
lubricate internal surfaces of leaves with anticorrosion and lubrication preparation.
During trailer use the user is obliged to observe lubrication instructions according to
attached lubrication schedule.