
SECTION 2
Pronar T743
2.15
•
operation of the trailer by persons under the influence of alcohol,
•
cleaning, maintenance and technical checks of the trailer.
The minimal risk may be kept to a minimum by following the recommendations below:
•
prudent and unhurried operation of the machine,
•
sensible application of the remarks and recommendations contained in the
Operator's Manual,
•
maintaining safe distance from forbidden or dangerous places during unloading,
loading and hitching machine,
•
carrying out repair and maintenance work in line with operating safety rules,
•
carrying out repair and maintenance work by persons trained to do so,
•
using close fitting protective clothing,
•
ensuring unauthorised persons have no access to the machine, especially
children,
•
maintaining safe distance from forbidden or dangerous places,
•
a ban on being on the machine when it is operating,
•
maintaining the machine in due technical condition.
2.3
INFORMATION AND WARNING DECALS
The trailer is labelled with the information and warning decals mentioned in table (2.1). The
symbols are positioned as presented in figure (2.3). Throughout the time it is in use, the user
of the machine is obliged to take care that notices and warning and information symbols
located on the trailer are clear and legible. In the event of their destruction, they must be
replaced with new ones. Safety decals are available from your PRONAR dealer or directly
from PRONAR customer service. New assemblies, changed during repair, must be labelled
once again with the appropriate safety signs. During machine cleaning do not use solvents
which may damage the coating of information label stickers and do not subject them to strong
water jets.
Summary of Contents for T743
