
SECTION 2
Pronar T743
2.5
•
In the event of malfunction of the hydraulic or pneumatic system, do not use the
trailer until the malfunction is corrected.
•
When connecting the hydraulic conduits to the tractor, make sure that the tractor
hydraulic system and machine are not under pressure. If necessary reduce
residual pressure in the system.
•
In the event of injuries being caused by pressurised hydraulic oil, contact a doctor
immediately. Hydraulic oil may find its way under the skin and cause infections. In
the event of contact of oil with eye, rinse with large quantity of water and in the
event of the occurrence of irritation consult a doctor. In the event of contact of oil
with skin wash the area of contact with water and soap. Do NOT apply organic
solvents (petrol, kerosene).
•
Use the hydraulic oil recommended by the Manufacturer. Never mix two types of
oil.
•
After changing the hydraulic oil, the used oil should be properly disposed of. Used
oil or oil, which has lost its properties, should be stored in original containers or
replacement containers resistant to action of hydrocarbons. Replacement
containers must be clearly marked and appropriately stored.
•
Do not store hydraulic oil in packaging designed for storing food or foodstuffs.
•
Rubber hydraulic conduits must be replaced every 4 years regardless of their
technical condition.
•
Unauthorised adjustment of the hydraulic manifold's settings is strictly forbidden.
2.1.4 TRANSPORTING THE MACHINE
•
When driving on public roads, comply with the road traffic regulations. in force in
the country, in which the trailer is used.
•
Do not exceed the permitted speed arising from limitations of road conditions and
construction limitations. Adjust travel speed to the prevailing road conditions,
trailer load and road traffic regulations limits.
•
The machine must NOT be left unsecured. When not connected to the tractor, the
trailer must be immobilised with parking brake and protected against rolling with
Summary of Contents for T743
