PRONAR NV161/1, Operator'S Manual

Page: 81 / 132

SECTION 4 Pronar NV161/1
│
NV161/2
│
NV161/3
│
NV161/4
│
NV161/5
4.15
To ensure precise manure spreading also along the field boundaries, the rear shields of the
manure spreader can be set in such a manner as to reduce the spreading width on one or
both sides of the manure spreader.
DANGER
Operation of the manure spreader without safety guards or with damaged PTO shaft
creates a direct threat to health and life of the machine operators.
Keep a safe distance from electric power lines. Do NOT spread manure near grazing
animals.
Do NOT use PTO rotation speed other than specified in table 3.1. If PTO shaft works at a
different speed, rotation speed of spreading wormshafts and discs will be too low or too
high and the drive will be at the risk of damage.
Take special care not to close or open the tailgates when they are locked by means of
two cut-off valves. Otherwise, hydraulic cylinders and/or tailgates may be damaged.
The manure spreader starting procedure in order to spread manure in the field.
Using the appropriate manifold lever in the tractor cab, open the tailgates (if
they are included in the manure spreader's equipment).
If hydraulic valve of one of the tailgates is closed, only one tailgate will
open.
To limit spreading to one side, open both tailgates maximally. Next,
using the hydraulic valve, close the tailgate which will not be controlled
and change the position of the other tailgate from the tractor.
Set the tractor PTO rotation speed proper for the manure spreader (specified
in table 3.1.).
Start the spreader unit by engaging PTO drive in tractor.
Start tractor PTO slowly in order to avoid damage to PTO shaft.
Raise the load box slide gate (if included in the manure spreader's
equipment).
Engage the chain conveyor.
Engage appropriate tractor gear and start working.
Disengage PTO when making turns during operation. Protection of
PTO shaft and uniform spreading are ensured in this way.