PRONAR NV161/1, Operator'S Manual

Page: 72 / 132

Pronar NV161/1
│
NV161/2
│
NV161/3
│
NV161/4
│
NV161/5 SECTION 4
4.6
•
other suspected faults
immediately cut off oil supply, disconnect tractor PTO drive and identify a fault. If a fault
cannot be rectified or the repair could void the warranty, please contact the retailer or directly
the manufacturer for additional clarifications or to perform the repair.
ATTENTION
Check correctness of hydraulic connections. Replace conduit plugs possibly.
Non-adherence to the recommendations stated in the Operator's Manual or improper use
of the manure spreader may cause damage to the machine.
The technical condition before starting the manure spreader must be no cause for
concern.
4.2 TECHNICAL CONDITION INSPECTION
When preparing the manure spreader for operation check the following daily:
technical condition of tyres and tyre pressure,
tightening of nuts fixing the following: (wheels, drawbar hitching eye,
spreading mechanism),
condition of other bolt and nut connections,
operation of manure spreader lights and indicators,
operation of manure spreader's brake system,
correct operation of the hydraulic system,
oil level in the spreader unit gear,
oil level in the transfer mechanism gear,
technical condition of PTO shaft, its shields and securing chains,
after a longer storage period of the machine, check technical condition of PTO
shaft and grease all the lubrication points according to the Operator's Manual
of the PTO shaft,