PRONAR NV161/1, Operator'S Manual

Page: 36 / 132

Pronar NV161/1
│
NV161/2
│
NV161/3
│
NV161/4
│
NV161/5 SECTION 2
2.10
immediately cleaned and disinfected. In the event of more serious injuries, seek a
doctor's advice.
•
Regularly check the condition of the bolt and nut connections.
•
Should it be necessary to change individual parts, use only original parts. Non-
adherence to these requirements may put the user and other people's health and
life at risk, and also damage the manure spreader and invalidate the warranty.
•
Before welding or electrical work, the manure spreader should be disconnected
from the power supply.
•
The paint coating should be cleaned off before beginning welding work. Burning
paint fumes are poisonous for people and animals. Welding work should be
carried out in a well lit and well ventilated space.
•
During welding work pay attention to flammable or fusible elements (parts of the
pneumatic, electric and hydraulic systems, plastic parts). If there is a risk that they
will catch fire or be damaged, they should be removed before commencing
welding work.
•
In the event of work requiring the manure spreader to be raised, use properly
certified hydraulic or mechanical lifts for this purpose. After lifting the manure
spreader, stable and durable supports must also be used. Do NOT carry out work
under the manure spreader, which has only been raised with the lift jack.
•
The lifted manure spreader must not be supported using fragile elements (bricks,
hollow bricks or concrete blocks).
•
After completing work associated with lubrication, remove excess oil or grease.
•
Do not repair control valve, brake cylinders and braking force regulator by
yourself.
•
After changing the hydraulic oil, the used oil should be properly disposed of.
•
Check the tyre pressure regularly.
•
When working with tyres, the manure spreader should be immobilised with
parking brake and secured against rolling by placing under the wheels the chocks
delivered with the spreader. Wheel may be taken off the manure spreader axle
only when the manure spreader is not loaded.