PRONAR NV161/1, Operator'S Manual

Page: 37 / 132

SECTION 2 Pronar NV161/1
│
NV161/2
│
NV161/3
│
NV161/4
│
NV161/5
2.11
•
Repair work on the wheels or tyres should be carried out by persons trained and
entitled to do so. This work should be carried out using appropriate tools.
•
Each time a wheel is fitted, tighten all nuts after the first 10 working hours and
then check proper tightening of nuts every 50 working hours. The above actions
should be repeated each time a wheel has been removed from the wheel axle.
2.2 DESCRIPTION OF RESIDUAL RISK
Pronar Sp. z o. o. in Narew has made every effort to eliminate the risk of accidents. There is,
however, a certain residual risk, which could lead to an accident, and this is connected
mainly with the actions described below:
•
using manure spreader for purposes other than those described in the Operator's
Manual,
•
being between the tractor and the manure spreader while the engine is running
and when the machine is being attached,
•
operation of the manure spreader by persons under the influence of alcohol or
other intoxicating substances,
•
oil leaks and sudden movement of elements resulting from line cracking,
•
operation of manure spreader by an authorised person,
•
being on the machine during work or transport,
•
cleaning, maintenance and inspection of the mechanisms of the manure spreader
connected with tractor using PTO shaft, when the tractor engine is switched on,
•
using unreliable PTO shaft,
•
making modifications to the machine without the consent of the Manufacturer,
•
exceeding permissible travel speed,
•
presence of persons or animals in areas invisible from the driver's position.
The residual risk may be kept to a minimum by following the recommendations below:
•
prudent and unhurried operation of the machine,