PRONAR NV161/1, Operator'S Manual

Page: 35 / 132

SECTION 2 Pronar NV161/1
│
NV161/2
│
NV161/3
│
NV161/4
│
NV161/5
2.9
2.1.6 MACHINE OPERATION
•
Staying in the material spreading area is forbidden due to danger which may be
caused by stones, pieces of wood etc. contained in the material.
•
Take particular care while spreading material near people and animals.
•
Before starting work, always check condition of elements that fix disintegrating
knives of spreader unit.
•
Take particular care while spreading material near roads and other vehicles.
2.1.7 CLEANING, MAINTENANCE AND REPAIRS
•
Repair, maintenance and cleaning work should be carried out with the tractor
engine turned off and the ignition key removed.
•
Manure spreader, spreader unit in particular, should be kept clean.
•
Remove the remains of manure from the manure spreader each time after
finished work.
•
Before climbing on to the manure spreader's load box, make sure that
unauthorised persons do not have access to the tractor, disconnect PTO shaft
and disconnect hydraulic system conduits from the tractor.
•
The manure spreader must be absolutely motionless, the tractor engine must be
switched off and particular care must be taken while climbing on to the manure
spreader's load box.
•
During the warranty period, any repairs may only be carried out by Warranty
Service authorised by the manufacturer. After the expiry of the warranty period it
is recommended that possible repairs to the machine be performed by specialised
workshops.
•
In the event of any fault or damage whatsoever, do not use the manure spreader
until the fault has been corrected.
•
During work, use the proper, close-fitting protective clothing, gloves and
appropriate tools.
•
Servicing and repair work should be carried out in line with the general principles
of workplace health and safety. In the event of injury, the wound must be