PRONAR NV161/1, Operator'S Manual

Page: 125 / 132

SECTION 5 Pronar NV161/1
│
NV161/2
│
NV161/3
│
NV161/4
│
NV161/5
5.41
5.11 STORAGE
After finishing work, the manure spreader should be thoroughly cleaned and
washed.
In the event of damage to the lacquer coating clean those places from rust
and dirt, degrease and then paint with paint maintaining uniform colour and
even thickness of protective coating. Until the time of touch-up painting, the
damaged place should be covered with a thin layer of grease, anticorrosion
preparation or priming paint.
It is recommended to keep the manure spreader in a closed or roofed building.
Before longer outdoor storage, it is essential to protect the machine against
adverse weather conditions, especially those causing corrosion and
accelerated ageing of tyres.
In the event of prolonged work stoppage, it is essential to lubricate all
elements regardless of the date of the last lubrication.
Chains of the spreader unit drive should be taken off, carefully washed and, if
suitable for further use, reinstalled and smeared generously with grease.
Wheel rims and tyres should be carefully washed and dried. During longer
storage it is recommended that every 2 to 3 weeks the machine may be
moved a bit so that the place of contact of tyres with ground is changed. The
tyres will not be deformed and maintain proper geometry. Also tyre pressure
should be inspected from time to time, and if necessary pressure should be
increased to appropriate value.
PTO shaft for connection with tractor should be stored in the horizontal
position.