PRONAR NV161/1, Operator'S Manual

Page: 68 / 132

Pronar NV161/1
│
NV161/2
│
NV161/3
│
NV161/4
│
NV161/5 SECTION 4
4.2
4.1 PREPARING FOR WORK BEFORE FIRST USE
4.1.1 CHECKING THE MANURE SPREADER AFTER DELIVERY
The manure spreader is supplied to the user completely assembled and does not require
additional mounting operations of machine sub-assemblies. The manufacturer guarantees
that the manure spreader is fully operational and has been checked according to quality
control procedures and is ready for use. This does not release the user from an obligation to
check the machine's condition prior to purchasing and before first use.
Before connecting the manure spreader, check whether the tractor meets applicable
requirements. The manure spreader may be hitched only to such a tractor which meets the
requirements specified in table (1.2).
ATTENTION
Before proceeding to hitching to tractor and before first use of the manure spreader the
user must carefully read this Operator's Manual and the Operator's Manual of PTO shaft
attached to the machine and observe all recommendations.
The manure spreader may only be hitched to a tractor which has the appropriate hitch
and required connection sockets for braking, hydraulic and electrical systems. Oil in the
tractor external hydraulic system must have appropriate characteristics or must be
mixable with the oil in the hydraulic system of the manure spreader.
Before connecting to tractor, machine operator must inspect the technical condition of the
manure spreader, adapt it to his/her own needs and prepare it for test start-up. In order to do
this:
check completeness of machine,
check condition of paint coatings, traces of corrosion or mechanical damage
(crushing, piercing, bending or breaking of minor elements),
check technical condition of protective shields and check if they are correctly
installed,
visually inspect the manure spreader individual components for mechanical
damage resulting from incorrect loading, transport or unloading of the
machine,