manualshive.com logo in svg

Promise Technology VessRAID 1740s, Product Manual, Page: 35 / 324

Share
Download
Promise Technology VessRAID 1740s Product Manual Download Page 35

Chapter 2: VessRAID Installation

21

Controller LEDs

When boot-up is finished and the VessRAID subsystem is functioning normally:

•

Battery, and Controller status LEDs display green continuously.

•

Ethernet LEDs display green or flash depending on your network 
connection.

Figure 14.VessRAID Controller LEDs

Disk Drive LEDs

There are two LEDs on each Drive Carrier. They report the presence of a disk 
drive, activity of the drive, and the drive’s current condition.

Figure 15.VessRAID disk drive carrier LEDs

If there is a disk drive in the carrier, the Power/Activity LED displays Green. If not, 
the Power/Activity LED remains dark. The Power/Activity LED flashes during 
drive activity.

The Disk Status LED displays Green when a drive is configured.

Controller Status

Fan 2

Fan 1

Battery

USB 2

USB 1

Dirty Cache

SAS JBOD Expansion
Diamond icon

SAS IN Circle icon

Fan 1

Fan 2

Disk Status

Power/Activity

Summary of Contents for VessRAID 1740s





































































































































































































































































































































Reviews:

No comments