manualshive.com logo in svg

Promise Technology VessRAID 1740s, Product Manual, Page: 288 / 324

Share
Download
Promise Technology VessRAID 1740s Product Manual Download Page 288

VessRAID 1740s, 1840s Product Manual

274

Resource

Resource is NOT 
available

System resources are low. Reduce system load or 
restart the VessRAID. See page 81 (WebPAM PROe) 
or page 179 (CLU).

Spare Check

Spare check started on 
the given spare drive

Result of settings or user action. Normal.

Spare check completed 
successfully on the given 
spare drive

Normal.

Spare Drives

Physical disk assigned as 
global spare

Result of settings or user action. Normal.

Physical disk is no longer 
assigned as global spare

Result of settings or user action. Normal.

Global Spare has been 
deleted

Result of settings or user action. Normal.

Physical disk assigned as 
dedicated spare

Result of settings or user action. Normal.

Physical disk is no longer 
assigned as dedicated 
spare

Result of settings or user action. Normal.

Dedicated Spare has 
been deleted

Result of settings or user action. Normal.

SMART

SMART error is received

A disk drive reported a SMART error. If this message 
appears repeatedly, replace the disk drive.

Synchronization

Synchronization is started Result of settings or user action. Normal.

Synchronization is 
completed

Normal.

Synchronization is 
paused

Synchronization paused because of user 
intervention, schedule or higher priority background 
activity.

Synchronization is 
resumed

Synchronization has resumed again after a pause or 
a reboot.

Reported Event

Corrective Action

Summary of Contents for VessRAID 1740s





































































































































































































































































































































Reviews:

No comments