Promise Technology VessRAID 1740s Product Manual Download Page 167

Page: 167 / 324

Chapter 5: Management with the CLU

153

Deleting a Spare Drive

To delete a spare drive:

From the Main Menu, highlight

Spare Drive Management

and press Enter.

A list of the current spare drives appears.

Highlight the spare drive you want to delete and press the spacebar to mark
it.

The mark is an asterisk (*) to the left of the listing.

Highlight

Delete Marked Spare Drives

and press Enter.

Press Y to confirm the deletion.

Caution

If the spare drive you delete is the only spare, the controller will not
rebuild a critical array until you provide a new spare drive.

Summary of Contents for VessRAID 1740s





































































































































































































































































































































Search results

Summary of Contents for VessRAID 1740s

Reviews:

Related manuals for VessRAID 1740s

Brands by name

Popular brands

Promise Technology VessRAID 1740s, Product Manual

Search results

Summary of Contents for VessRAID 1740s

Reviews:

Related manuals for VessRAID 1740s

Brands by name

Popular brands