Promise Technology VessRAID 1740s Product Manual Download Page 24 | Manualshive

Page: 24 / 324

Promise Technology VessRAID 1740s Product Manual Download Page 24

VessRAID 1740s, 1840s Product Manual

10

Figure 1. VessRAID front view

A defective drive may be replaced without interruption of data availability to the
host computer. If so configured, a hot spare drive will automatically replace a
failed drive, securing the fault-tolerant integrity of the logical drive. The self-
contained hardware-based RAID logical drive provides maximum performance in
a compact external chassis.

Figure 2. VessRAID 1740s rear view

Figure 3. VessRAID 1840s rear view

For a description of the LEDs, see pages 20 and 21.

Drive Carrier LEDs

Drive Carriers

Power and Status LEDs

RAID Controller

Power Supply

RAID Controller

Power Supply

«
...
22
23
24
25
26
...
»

Summary of Contents for VessRAID 1740s





































































































































































































































































































































Reviews:

No comments