manualshive.com logo in svg

Promise Technology VessRAID 1740s, Product Manual, Page: 212 / 324

Share
Download
Promise Technology VessRAID 1740s Product Manual Download Page 212

VessRAID 1740s, 1840s Product Manual

198

18. Press the 

 button again to confirm.

The display shows the logical drive creation process. When the creation is 
finished, the LCD returns to 

Logical Disk Create

.

Deleting a Logical Drive

To delete a logical drive from a disk array:

1.

Press the 

 or 

 button until the display says 

Array Configure

.

2.

Press the 

 button and the display says 

Auto Configure

.

3.

Press the 

 or 

 button until the display says 

Advanced Configure

.

4.

Press the 

 or 

 button until the display says 

Logical Drive Delete.

5.

Press the 

 button again to display a list of logical drives

.

6.

Press the 

 or 

 button choose a logical drive for deletion

.

7.

Press the 

 button and the display says 

Delete Logical Drive X?

8.

Press the 

 button again and the display says 

Are you sure? NO.

9.

Press the 

 button to change the answer to 

Y

ES, then press the 

 

button.

10. Press the 

 button again to confirm.

The chosen logical drive is deleted.

Viewing Logical Drive Information

This function requires the LCD to be in Advanced mode. See page 184.

To view logical drive information:

1.

Press the 

 or 

 button until the display says 

Logical Disk Management

.

2.

Press the 

 button and the display a list of logical drives by ID number.

3.

Press the 

 or 

 button to scroll through the list of logical drives.

4.

Press the 

 button choose a logical drive.

Caution

When you delete a logical drive, you delete all the data it contains. 
Back up all important data before deleting a logical drive.

Summary of Contents for VessRAID 1740s





































































































































































































































































































































Reviews:

No comments