Promise Technology VessRAID 1740s Product Manual Download Page 142

Page: 142 / 324

VessRAID 1740s, 1840s Product Manual

128

Highlight

Lock

and press Enter.

Resetting the Lock

To reset the lock with a new time:

From the Main Menu, highlight

Subsystem Management

and press Enter.

Highlight

Lock Management

and press Enter.

In the Lock Time field, type a lock time in minutes.

1 to 1440 minutes (24 hours)

Highlight

Renew

and press Enter.

Releasing the Lock

From the Main Menu, highlight

Subsystem Management

and press Enter.

Highlight

Lock Management

and press Enter.

Highlight

Unlock

and press Enter.

Releasing a Lock set by another user

To release somebody else’s lock:

From the Main Menu, highlight

Subsystem Management

and press Enter.

Highlight

Lock Management

and press Enter.

Highlight

Force Unlock

and press the Spacebar to change to

Yes

Highlight

Unlock

and press Enter.

Setting Subsystem Date and Time

Use this screen to make Date and Time settings:

From the Main Menu, highlight

Subsystem Management

and press Enter.

Highlight

Modify System Date and Time

and press Enter.

Highlight the System Date or System Time setting.

Press the backspace key to erase the current value.

Type in a new value.

Press Ctrl-A to save your settings.

Summary of Contents for VessRAID 1740s





































































































































































































































































































































Search results

Summary of Contents for VessRAID 1740s

Reviews:

Promise Technology VessRAID 1740s, Product Manual, Page: 142 / 324

Search results

Summary of Contents for VessRAID 1740s

Reviews: