Promise Technology VessRAID 1740s Product Manual Download Page 146

Page: 146 / 324

VessRAID 1740s, 1840s Product Manual

132

Managing the Enclosure

Enclosure Management includes the following functions:

•

Viewing Enclosure Information (page 132)

•

Viewing Power Supply Status (page 132)

•

Locating a Power Supply (page 133)

•

Viewing Cooling Unit Status (page 133)

•

Viewing Voltage Sensor Status (page 133)

•

Viewing Temperature Sensor Status (page 133)

•

Setting Temperature Thresholds (page 134)

•

Checking the Batteries (page 134)

•

Reconditioning a Battery (page 135)

•

Locating an Enclosure (page 135)

•

Viewing Enclosure Topology (page 136)

Viewing Enclosure Information

Enclosure Management includes information, status, settings and location. To
access Enclosure Management:

From the Main Menu, highlight

Subsystem Management

and press Enter.

Highlight

Enclosure Management

and press Enter.

To access FPU VPD information (vital product data on field replaceable units),
highlight

FPU VPD Information

and press Enter.

This function lists the battery backup unit and backplane.

Viewing Power Supply Status

To view the status of the power supplies:

From the Main Menu, highlight

Subsystem Management

and press Enter.

Highlight E

nclosure Management

and press Enter.

Highlight

Power Supply Units

and press Enter.

The screen displays the status of VessRAID’s power supply. If any status
differs from

Powered On and Functional

, there is a power supply

malfunction. See “Replacing a Power Supply” on page 208.

Summary of Contents for VessRAID 1740s





































































































































































































































































































































Search results

Summary of Contents for VessRAID 1740s

Reviews:

Promise Technology VessRAID 1740s, Product Manual, Page: 146 / 324

Search results

Summary of Contents for VessRAID 1740s

Reviews: