![background image](http://html.mh-extra.com/html/promise-technology/smartstor-nas/smartstor-nas_product-manual_1617250224.webp)
SmartStor NAS Product Manual
220
3. In the Tree, click the
File System Management
icon.
4. Look for the RAID Volume
icon on the
File System Status
tab.
If the RAID Volume icon is Critical
(has a yellow!), the file system
contains errors and you must rebuild the file system. See below.
Rebuilding the File System
When you only have read access to your files or no access at all, the File
System might be damaged. This feature checks, and where necessary rebuilds
the File System without loss of data.
You cannot access any data on the SmartStor while the check/rebuild operation
is running.
To rebuild a File System:
1. Click
the
Administration
topic and choose the
RAID & File System
icon to
expand the Tree.
2. In the Tree, click the
File System Management
icon.
3. In
the
File System Status
tab, click the RAID Volume Critical icon to display
the
Check File System
button.
4. Click
the
Check File System
button.
5. In the confirmation box, type
yes
into the field provided, then click the
OK
button.
During the File System Check or Rebuild, the System Status LED blinks
amber and the Disk Activity LEDs blink blue/green. See page 217, Figure 1.
The time needed to check and rebuild the File System depends on the
amount of data on the SmartStor. The process can take anywhere from 10
minutes to 2 hours.
Warning
Do not disconnect the power or shut down the SmartStor while
the check/rebuild is running!
8.7 Checking the Event Log in WebPASM
To view the Event Log in WebPASM:
To check Enclosure status:
1. Start
WebPASM.
2. Click
the
Administration
topic and choose the
Management
icon to expand
the Tree.
3. In the Tree, click the
Event Log
icon.
The Event Log displays. See Figure 4.