![background image](http://html.mh-extra.com/html/promise-technology/smartstor-nas/smartstor-nas_product-manual_1617250012.webp)
SmartStor NAS Product Manual
8
4. Insert the screws through the holes in the drive carrier and into the sides of
the disk drive.
․
Install only the counter-sink screws supplied with the SmartStor.
․
Install four screws per drive.
․
Snug each screw. Be careful not to over-tighten.
5. Reinstall the drive carrier into the SmartStor enclosure.
Repeat steps 2 through 5 until all of your disk drives are installed.
6. Close the door on the front of the SmartStor.
3.3 Task 3: Connecting to the Network
To connect the SmartStor to your network:
1. Attach one end of the network cable to the RJ45 network connection. See
Figure 2 and 4.
2. Attach the other end of the network cable to your Ethernet hub or switch.
3.4 Task 4: Connecting the Power
To power the SmartStor:
1. Attach the power cord on the back of the SmartStor enclosure and plug the
other end into the power source. See Figure 2 and 4.
2. On the front of the SmartStor, press the power button. See Figure 1 and 3.
It takes about a minute to boot the SmartStor. When fully booted:
․
The System Status LED turns to normal status color. See Figure 1 and
3.
․
The system might take 2 minutes for boot up. After boot up successful,
buzzer beeps one time.
3.5 Task 5: Installing the SmartNAVI(Recommend)
SmartNAVI is a client utility which helps users connect their PC/Mac to
SmartStor NAS. It's also provide management and client backup function for
SmartStor users.
OS Support
The following operating systems support SmartNAVI:
․
Windows XP 32BIT Professional with SP3
․
Windows XP 64BIT XP 64 with SP2
․
Windows Vista 32/64 BIT Enterprise with SP2
․
Windows Server 2003 R2 32/64 BIT with SP2
․
Windows Server2008 32/64 BIT enterprise with SP2
․
Windows 7 32/64 BIT