SmartStor NAS Product Manual
224
Reported Event
Corrective Action
Migration or Rebuilding on array X
aborted at Y%
RAID Volume Migration or Rebuild
was aborted (stopped) by user
action.
Migration or Rebuilding on array X
aborted at Y% because of error.
RAID Volume Migration or Rebuild
has aborted (stopped) because of an
error. Check the disk drives.
See page 217. Check the RAID
Volume. See page 217.
RAID status: “OFFLINE”.
The SmartStor NAS X volume Y is
offline.
Check the disk drives. See page 217.
Replace the failed drive. See page
217. Create a new RAID Volume.
See page 158.
RAID status: “CRITICAL”.
The SmartStor NAS X volume Y
is not functioning correctly.
Check the disk drives. See page 217.
Replace the failed drive. See page
217. The RAID Volume will rebuild
automatically.
RAID X had some errors.
Formatting was aborted!
Check the disk drives. See page 217.
Replace the failed drive. See page
217.
8.8 Checking Enclosure Status in WebPASM
To check Enclosure status:
1. Start
WebPASM.
2. Click
the
Administration
topic and choose the
System
icon to expand the
Tree.
3. In the Tree, click the
System Information
icon.
4. Click
the
Enclosure Information
tab.
See Figure 5.