![background image](http://html.mh-extra.com/html/promise-technology/smartstor-nas/smartstor-nas_product-manual_1617250220.webp)
SmartStor NAS Product Manual
216
Chapter 8: Troubleshooting
This chapter deals problems you might encounter with your SmartStor and how
to resolve them. Also see “Frequently Asked Questions” on page 233.
8.1 Responding to an Audible Alarm
The SmartStor has two beep patterns
․
Single beep, not repeated
- The SmartStor is online
․
Two beeps, continuously repeated
- The SmartStor reports a problem
When you boot or reboot the SmartStor, and the buzzer is enabled, the buzzer
sounds one time to indicate that the SmartStor is online.
8.2 Checking the System Status LED
The SmartStor system status LED (see Figure 1.) reports the condition of the
Enclosure fan and power supply:
․
Blue(NS4600)/Green(NS2600)
- Normal Enclosure function
․
Amber
- There is a problem with the fan or power supply
․
Red
- The fan, power supply, or file system has failed.
The system status LED blinks red three times when you click the
Locate NAS
icon in SmartNAVI or the
Locate
button in WebPASM.
If your SmartStor is configured to work with a UPS, it will continue to run after a
power supply failure.
8.3 Checking Disk Status LEDs
The disk status LEDs (see Figure 1.) report the condition of the disk drives:
․
Blue(NS4600)/Green(NS2600)
- Normal disk drive function
․
Amber
- Rebuilding to this disk drive
․
Red
- Failed disk drive
․
Dark
- No disk drive is installed
The disk status LEDs are also dark when the drives are powered down during
system stand-by.
See “Replacing a Failed Disk Drive” on page 217.