Promise Technology Pegasus R4 Product Manual Download Page 65

Page: 65 / 148

Chapter 3: Management with the Promise Utility

Managing Logical Drives

Logical drive management includes:

•

Viewing a List of Logical Drives (below)

•

Viewing Logical Drive Information (page 58)

•

Viewing Logical Drive Statistics (page 59)

•

Making Logical Drive Settings (page 59)

•

Viewing Logical Drive Check Tables (page 60)

•

Creating a Logical Drive Manually (page 61)

•

Formatting your Logical Drives (page 62)

•

Locating a Logical Drive (page 62)

•

Deleting a Logical Drive (page 63)

•

Initializing a Logical Drive (page 63)

•

Redundancy Check on a Logical Drive (page 64)

•

Migrating a Logical Drive (page 65)

•

Running PDM on a Logical Drive (page 66)

Viewing a List of Logical Drives

To view a list of logical drives, do one of the following actions:

•

Click the

Logical Drive

icon.

•

From the Storage menu, choose

Logical Drive

The list of logical drives appears. Logical drive information includes:

•

– LD0, LD1, etc.

•

Alias

– If assigned.

•

Status

–

= Normal.

= Critical.

= Offline.

•

Capacity

– Data capacity of the logical drive.

•

RAID Level

– Set when the logical drive was created.

•

Stripe

– Set when the logical drive was created.

•

Cache Policy

– Read cache and Write cache settings.

•

Array ID

– ID number of the disk array where this logical drive was

created.

Summary of Contents for Pegasus R4





















































































































































Search results

Summary of Contents for Pegasus R4

Reviews:

Related manuals for Pegasus R4

Brands by name

Popular brands

Promise Technology Pegasus R4, Product Manual

Search results

Summary of Contents for Pegasus R4

Reviews:

Related manuals for Pegasus R4

Brands by name

Popular brands