Promise Technology Pegasus R4 Product Manual Download Page 126

Page: 126 / 148

Pegasus R6, R4 Product Manual

118

Connection Problems

Connection problem troubleshooting includes:

•

Cables (below)

•

Daisy-Chains (page 119)

Cables

While the installation of the cables and components was correct, they don't
function properly, or at all, because:

•

A connector is dirty or corroded

•

A connector is loose or damaged

•

A cable looks OK outside but has an open circuit inside

•

The wrong cable was used. See the Note below

Be sure to use approved cables because:

•

They are the proper ones for your system.

•

They are sold in brand-new condition.

Note

Mini Display extension cables cannot be used to connect

data

devices

such as Pegasus to Thunderbolt-enabled computers.

Mini Display extension cables can only be used to connect

display

devices

to Pegasus.

Summary of Contents for Pegasus R4





















































































































































Search results

Summary of Contents for Pegasus R4

Reviews:

Related manuals for Pegasus R4

Brands by name

Popular brands

Promise Technology Pegasus R4, Product Manual

Search results

Summary of Contents for Pegasus R4

Reviews:

Related manuals for Pegasus R4

Brands by name

Popular brands