Promise Technology Pegasus R4 Product Manual Download Page 93

Page: 93 / 148

Chapter 4: Technology Background

RAID 0

A RAID 0 source logical drive can migrate to the following target logical drives:

See “Migrating a Logical Drive” on page 65.

RAID 1

A RAID 1 Source logical drive can migrate to the following Target logical drives:

See “Migrating a Logical Drive” on page 65.

Target

Requirements

RAID 0

Add physical drives.

RAID 1

2 physical drives only.
Only a single-drive RAID 0 can migrate to RAID 1 by adding 1
physical drive.

RAID 1E

3 or more physical drives.
If existing physical drives have no unused space, add 1 or
more physical drives.

RAID 5

3 physical drives minimum, maximum 4 (R4) or 6 (R6).
RAID 0 must have less than 4 (R4) or 6 (R6) physical drives.
If existing physical drives have no unused space, add 1 or
more physical drives.

RAID 6

4 physical drives minimum, 4 (R4) or 6 (R6).
If existing physical drives have no unused space, add 1 or
more physical drives.

RAID 10

4 physical drives minimum. Even number of physical drives.
If existing physical drives have no unused space, add 1 or
more physical drives.

Target

Requirements

RAID 0

None.

RAID 1E

3 or more physical drives.
Add 1 or more physical drives.

RAID 5

3 physical drives minimum, 4 (R4) or 6 (R6).
RAID 1 must have less than 4 (R4) or 6 (R6) physical drives.
Add 1 or more physical drives.

RAID 10

4 physical drives minimum. Even number of physical drives.
Add 2 or more physical drives.

Summary of Contents for Pegasus R4





















































































































































Search results

Summary of Contents for Pegasus R4

Reviews:

Related manuals for Pegasus R4

Brands by name

Popular brands

Promise Technology Pegasus R4, Product Manual

Search results

Summary of Contents for Pegasus R4

Reviews:

Related manuals for Pegasus R4

Brands by name

Popular brands