manualshive.com logo in svg

Promise Technology Pegasus R4, Product Manual, Page: 95 / 148

Share
Download
Promise Technology Pegasus R4 Product Manual Download Page 95

Chapter 4: Technology Background

87

RAID 6

A RAID 6 Source logical drive can migrate to the following Target logical drives:

See “Migrating a Logical Drive” on page 65.

RAID 10

A RAID 10 Source logical drive can migrate to the following Target logical drives:

When you migrate RAID 10 logical drive, it becomes RAID 1E by default.

If you want a RAID 10 logical drive, there must be an even number of physical 
drives and you must specify RAID 10 for the target logical drive.

See “Migrating a Logical Drive” on page 65.

Target

Requirements

RAID 6

Add physical drives. Maximum of 4 (R4) or 6 (R6).

Target

Requirements

RAID 0

None.

RAID 1E

None.

RAID 5

3 physical drives minimum, maximum of 4 (R4) or 6 (R6).
RAID 10 must have less than 4 (R4) or 6 (R6) physical drives.

RAID 6

4 physical drives minimum, maximum of 4 (R4) or 6 (R6).

The RAID 10 logical drive must have less than 4 (R4) or 6 
(R6) physical drives.

If existing physical drives have no unused space, add 1 or 
more physical drives.

RAID 10

Add physical drives in multiples of two.
Even number of physical drives.

Summary of Contents for Pegasus R4





















































































































































Reviews:

No comments