Promise Technology Pegasus R4 Product Manual Download Page 94

Page: 94 / 148

Pegasus R6, R4 Product Manual

RAID 1E

A RAID 1E Source logical drive can migrate to the following Target logical drives:

See “Migrating a Logical Drive” on page 65.

RAID 5

A RAID 5 Source logical drive can migrate to the following Target logical drives:

See “Migrating a Logical Drive” on page 65.

Target

Requirements

RAID 0

None.

RAID 1E

Add physical drives.

RAID 5

3 physical drives minimum, 4 (R4) or 6 (R6).
RAID 1E must have less than 4 (R4) or 6 (R6) physical drives.
If existing physical drives have no unused space, add 1 or
more physical drives.

RAID 10

4 physical drives minimum. Even number of physical drives.
If existing physical drives have no unused space, add 1 or
more physical drives.

Target

Requirements

RAID 0

None.

RAID 1E

None.

RAID 5

Add physical drives. Maximum of 4 (R4) or 6 (R6).

RAID 6

4 physical drives minimum, maximum of 4 (R4) or 6 (R6).
If existing physical drives have no unused space, add 1 or
more physical drives.

RAID 10

4 physical drives minimum. Even number of physical drives.
If existing physical drives have no unused space, add 1 or
more physical drives.

Summary of Contents for Pegasus R4





















































































































































Search results

Summary of Contents for Pegasus R4

Reviews:

Related manuals for Pegasus R4

Brands by name

Popular brands

Promise Technology Pegasus R4, Product Manual

Search results

Summary of Contents for Pegasus R4

Reviews:

Related manuals for Pegasus R4

Brands by name

Popular brands