manualshive.com logo in svg

Promise Technology Pegasus R4, Product Manual, Page: 88 / 148

Share
Download
Promise Technology Pegasus R4 Product Manual Download Page 88

Pegasus R6, R4 Product Manual

80

RAID 5 – Block and Parity Stripe

RAID 5 organizes block data and parity data across the physical drives. 
Generally, RAID Level 5 tends to exhibit lower random write performance due to 
the heavy workload of parity recalculation for each I/O. RAID 5 is generally 
considered to be the most versatile RAID level. It works well for file, database, 
application and web servers. 

Figure 4. RAID 5 stripes all drives with data and parity information

The capacity of a RAID 5 logical drive equals the smallest physical drive times 
the number of physical drives, minus one. Hence, a RAID 5 logical drive with four 
100 GB physical drives has a capacity of 300 GB. A RAID 5 logical drive with two 
120 GB physical drives and one 100 GB physical drive has a capacity of 200 GB.

RAID 5 is generally considered to be the most versatile RAID level.

A RAID 5 on Pegasus R4 consists of three or four physical drives.

A RAID 5 on Pegasus R6 consists of three to six physical drives.

Recommended Applications for RAID 5:

•

File and Application servers 

•

WWW, E-mail, and News servers 

•

Intranet servers

Advantages

Disadvantages

•

High Read data transaction rate

•

Medium Write data transaction 
rate

•

Good aggregate transfer rate

•

Most versatile RAID level

•

Disk failure has a medium impact 
on throughput

Data

Blocks

Distributed Parity

Physical Drives

Summary of Contents for Pegasus R4





















































































































































Reviews:

No comments