Promise Technology Pegasus R4 Product Manual Download Page 18

Page: 18 / 148

Pegasus R6, R4 Product Manual

Installing the Software

The Pegasus unit ships ready to use without configuration or set-up. These
instructions are for users who plan to:

•

Install their own physical drives

•

Configure the Pegasus manually

Software installation involves two separate operations:

•

Installing the OS driver

•

Installing Promise Utility software

OS Support

The following operating systems support the Promise Utility:

•

Mac OS 10.6.x

•

MacBook Pro/iMac Software Update 1.5

MacBook Pro/iMac Software Update

To check your software version:

On the MacBook Pro or iMac desktop, click the Apple icon and choose

Software Update...

from the dropdown menu.

The Software Update dialog box opens. See page 11, Figure 6.

Look for

MacBook Pro/iMac Software Update 1.5.

•

MacBook Pro/iMac Software Update 1.5

appears in the list, click the

Install Items

button and wait for the installation to finish.

•

MacBook Pro/iMac Software Update 1.5

does NOT appear in the list,

the update has already been installed on your computer. Go to “Driver
Installation: Macintosh” on page 11.

Important

Be sure the

MacBook Pro/iMac Software Update 1.5

has been

installed BEFORE you install the Promise driver from the software
CD or from the Promise website.

Summary of Contents for Pegasus R4





















































































































































Search results

Summary of Contents for Pegasus R4

Reviews:

Related manuals for Pegasus R4

Brands by name

Popular brands

Promise Technology Pegasus R4, Product Manual

Search results

Summary of Contents for Pegasus R4

Reviews:

Related manuals for Pegasus R4

Brands by name

Popular brands