Primes MicroSpotMonitor Plus HighBrilliance, Original Instructions Manual

Page: 63 / 116

63 Revision 00 EN - 02/2022
MSM+ HB
35,0(6
9.5.3 Measure a plane
DANGER
Serious eye or skin injury due to laser radiation
X
Observe the warning messages in chapter 9.1 on page 44.
1. Switch on the laser.
2. Click on the Settings tab.
3. Click on the Find beam button.
 The laser beam is automati-
cally searched for in the entire
measurement range. Measurement
window size, integration time and filter
level of the filter wheel are set auto-
matically.
If the search is successful, the beam
is displayed in the graphic representa-
tion.
If the beam is not displayed:
4. Select the Low power mode option
or increase the integration time or se-
lect a weaker filter of the filter wheel.
5. Select a different z-position.
6. Check again the correct alignment of
the device on the x-y plane.
7. Increase the laser power (step by
step).
As soon as the beam is displayed:
8. Click the Start button.
 The measurement begins.
9. Optional:
If necessary, click the Stop button to
end the measurement prematurely.