Primes MicroSpotMonitor Plus HighBrilliance, Original Instructions Manual

Page: 54 / 116

54
Revision 00 EN - 02/2022
MSM+ HB
35,0(6
Entering and activating parameters
To transfer a parameter value entered in
the
Device control
menu to the active
configuration, it must be confirmed with
the Enter key.
1. Enter the desired value in the parame-
ter field.
The background color of the parame-
ter field changes to blue.
2. Confirm the entry by pressing the
Enter key.
The field returns to its original back-
ground color.
Saving a configuration in the device
All options marked with an asterisk in the
Device control
menu can be saved in the
EEPROM in the device.
In this case, the settings are retained even
if the device is switched off or disconnec-
ted from the power source.
1. Click on the
Advanced
tab.
2. Click on the
Save device settings
button.
Saving a safety-relevant locked area
We recommend saving a configuration in
the device especially if a safety-relevant
locked area is configured in the
Advan-
ced
tab.
If the locked area was configured but
not saved via
Save device settings
,
then a dialog box appears after
clicking the
Start
button (to start a
measurement).
X
If you now want to save the locked
area (and the other options marked
with an asterisk) in the device, click
the
OK
button.
X
Otherwise, click on the
Cancel
button.

The settings are active during the
measurement, but must be configu-
red again when the device is switched
off or disconnected from the power
source.