Primes MicroSpotMonitor Plus HighBrilliance, Original Instructions Manual

Page: 14 / 116

14
Revision 00 EN - 02/2022
MSM+ HB
35,0(6
The beam geometries (beam position, beam radius and azimuth angle) are determined for each plane ac-
cording to the procedures described in the standard ISO 11146 (2. moment and 86 % power inclusion).
The beam propagation parameters (focus position, focus radius, Rayleigh length, divergence, M
2
, K and
beam parameter product) are determined with the beam geometry data. From the measurement data for the
semi-axes of the beam, the ellipticity of the focus and the astigmatic difference are determined according to
ISO11146.
An automatic function supports the user when measuring a caustic.
Device Assembly
Z-axis-drive
High Brilliance
measuring objective
Beam entrance
HighPower
beam absorber
Z-axis-drive
Fig. 4.3: Components of the MSM+ HB
Lever to adjust the magnification
Lever to adjust the
magnification
Magnification objective (high)
Alignment objective (low)
Standard
Fig. 4.4: Levers to adjust the magnification