Precor AMT 823, Service Manual

Page: 73 / 400

© Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law Page 71
P80 Connectivity Settings Table
Connectivity settings
Settings Default Detail
Network Type
Wired
Configuration Automatic Automatic (DHCP) or
Manual (Static IP)
Press Network Settings
to view the:
IP Address
Netmask
Gateway
DNS Primary
DNS Secondary
Status N/A
Connected –Connected
to the network.
Not Connected – Not
connected to the
network
IP Address
N/A Location-specific
Preva Server na.preva.precor.com
P80 Connectivity Set Up and Registration Procedure
1
Before you attempt to connect to the Precor Preva Server, check the
status field and ensure that the Connected is displayed. If the
Status field shows Not Connected, you will need to diagnose your
networking issue. Continue with Step 2. If the Status Field shows
Connected go to step 3.
2
Either the Ethernet cable is not connected or there is a problem
with the network connection. Check the connection and then check
the Status field again. If the Status field shows Connected continue
with step 3. If the Status field still shows Not Connected contact
your IT expert.