Precor AMT 823, Service Manual

Page: 68 / 400

© Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law Page 66
Brake Test
AMT, RBK,
UBK, EFX
1
Touch Brake Test , then Touch START .
2
Use the machine control paddle to change
the resistance up and down. The
resistance changes will be displayed in
power bits.
3
Touch STOP to end the test. Touch

BACK to Systems Test.
Battery Test
AMT, RBK,
UBK, EFX
1
Touch Battery Test , and then Touch
START .
2
The console will display the voltage of
the battery.
3
Touch STOP to end the test. Touch

BACK to Systems Test.
SPM
AMT, EFX
1
Touch SPM Test , and then START .
2
The console will display Pulse. The
pulse is showing a count of zero
crossings from the generator. SPM shows
a software averaged version of pulse.
An averaged pulse per minute will
display as Minimum and a Maximum pulse.
3
Touch STOP to end the test. Touch

BACK to exit to Systems Tests.
RPM Test
RBK, EFX
1
Touch RPM Test , and then START .
2
The console will display Pulse. The
pulse is showing a count of zero
crossings from the generator. RPM shows
a software averaged version of pulse.
3
Touch STOP to end the test. Touch

BACK
to exit to Systems Test.
CrossRamp
EFX Only
1
Touch CrossRamp Test , and then Touch
START .
2
Use the machine control paddle to change
the CrossRamp. The console will display
the analog to digital (A/D) and Glitches
incline position number. Available
battery voltage to the lift system will
be displayed.
3
Touch STOP to end the test. Touch

BACK to Systems Test.