Precor AMT 823, Service Manual

Page: 26 / 400

© Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law Page 24
INFORMATION DISPLAY.
Setting the P30 Club Parameters
This procedure allows you to change the following club settings:
♦
Select Language
♦
Select Units
♦
Set Max Workout Time
♦
Set Max Pause Time
♦
Set Cool Down Time
Procedure
1
The AMT 885, 835, 833, and 832 uses the standard access codes to
provide access to the various software features. Use the PAUSE key
and the numeric keypad to enter the access code. The standard access
codes use all sequential key presses. The allowable delay between
key presses are short. . If too much time is taken between key
presses or the wrong key is pressed the access procedure will be
aborted. If the access is aborted, it will be necessary to start
over from the beginning.
2
See
P30 Setting Club Parameters Table
(on page 24).
P30 Setting Club Parameters Table
Setting
Action Description
Club
Settings
With the banner scrolling,
press keys
PAUSE,5,6,5,1,5,6,5 ,
sequentially.
DIAGS-SET CLUB PARAMETERS will scroll
across the display followed by select
LANGUAGE.
Set
Language
Press the OK key.
Use the

,

keys to toggle
between the available
languages.
A list of available languages will be displayed,
including
ENGLISH
DEUTSCH
ESPANOL
FRANCAIS
NEDERLANDS