Precor AMT 823, Service Manual

Page: 71 / 400

© Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law Page 69
Speaker Test
All
1
Touch Speaker Test.
2
This test will send an audible sound to
the speaker mounted in the headphone
jack and while providing a graphic of a
scrolling bar on the screen. When the
test is complete it will automatically
exit to the Systems Test screen.
Numeric
Backlight Test
All
1
Touch Numeric Backlight Test .
2
This tests the back lights of the lower
display just above the paddle controls.
The back lights of the display will
illuminate in sequence and then
automatically exit to the Systems Test
screen.
Numeric Display
Test
All
1
Touch Numeric Display Test .
2
This will test the numeric LCD display
just above the paddle controls. All the
numeric characters will be displayed in
sequence and then automatically exit to
the Systems Test.
Heart Rate
All
1
Touch Heart Rate .
2
Grasp both of the heart rate grips on
the handlebar, after a couple of seconds
the heart rate will be displayed.
3
Touch

BACK to exit to Systems Test.
Step Count Reset
AMT12 Only
1
Touch Step Count Reset .
The screen will display:
Current total step count
Step Count Reset
Odometer Value at the last reset.
1
During this step it is necessary to
pedal the AMT while the Step Count is
being reset, touch START.
The Current Total Step Count will go to "0".
The Step Count Reset will increment up.
The Odometer will display the total miles
recorded at the time of the reset.
1
Touch Back to System Tests.