UPS Standard Features
Your UPS has many standard features that enable it to provide you
cost-effective and
reliable power protection:
The
Panel on the front of the UPS contains an LCD screen where you can see
information about the current status of the UPS, view a statistical history and log of UPS
events, and display a real-time graphic representation of power flowing through the UPS
components. Backlit status indicators show the operating mode of the UPS and
you
lo system events as they occur. The monitor panel is described in “Using the Monitor
Panel” on page 19.
Panel
The Control Panel inside the
of the UPS contains the operator controls you use
to start and stop the UPS, change its operating mode, and reset me Load Off feature. The
operator panel is described in “Using the Control Panel’ on page 15.
Interface Panel
Two
are standard on all units, and are
isolated
from the UPS. You can use these ports to link the UPS system to a remote terminal,
from which you can view information similar to that displayed on the LCD
This feature is described thoroughly in
Plus 80 Serial Communications.
contacts are provided for
to equipment at your facility, such as
a
light, an audible alarm, or a computer terminal. The equipment you connect to these
contacts
you to a UPS
This feature is described further on page of
“Using Features and Options.’
You can connect your
system contacts to six (6) inputs in me UPS. The
UPS uses these inputs to monitor your building
in
to the UPS status.
This feature is described further on page 31 of ‘Using Features and Options.’
Filter
A standard
power factor correction that
you to save on your initial
installation and
costs. The
also reduces input harmonic current distortion
and minimize9 upstream interference that can damage
hardware components.
Emergency Load
A
Off
is provided for situations where you must
cut all power
your
load. The button is located on me front of the UPS for quick access, but is
with a clear
to prevent inadvertent operation. The
must be
raised before you can press the button. The Load Off button is
in detail in
“Using me Load
Sutton’ on page 51.
Automatic Battery Charge Current
A preset
restricts battery charging current, to protect batteries from damage due to
high current charging. Charging at high currents can overheat and damage batteries.
Installation Features
Power and control
can
routed through the top or bottom of
cabinet.
Each cabinet has an
In addition. you can
the caster
assemblies
provided
each cabinet for ease of movement during
Plus 66 UPS operator’s Manuel
5
Summary of Contents for Plus 80
