Powerware Plus 80, Operation

Page: 69 / 160

I
I
I
I
I
I
I
I
I
I
Printing Selected Information
If a port is operating in Terminal mode and is connected to a computer, you can use key
combinations
at
any time to print only information:
Prints the entire log with a header
Prints the current system meters with a header
Prints all system information
To a key combination, hold down the Control key and press the letter key.
Entire Log +
This key sequence prints the entire Event History Log of the UPS at the time the data is
requested. The printout begins with the oldest alarm entry in the queue and ends with the
most recent. Any alarms that occur while the Event History Log is printing are included in
chronological order.
The Event History Log lists up to 400 system events in chronological order, with the most
recent event listed last. Figure
shows a sample Event History printout.
Uninterruptible Power System
U P S
supplying Load
03 JAN 1994
Alarm:
Notice:
Event History Log
Event Description
MAY 12
COMMAND: Start Switch
12
STATUS: On Bypass, Auto Mode
12
STATUS:
System
12 COMMAND:
Mode Switch to Manual
12 STATUS:
On
12
Mode Switch to
12 Start switch
12 STATUS:
System
04 NOTICE:
Room High Temperature
04 ALARM: Temp. Shutdown Imminent
04 ALARM:
Cleared, Over
04 NOTICE:
Room Temperature OK
NOTICE:
Charger Voltage Under Limit
18 STATUS: System Normal. On
NOTICE: Not Available
18 NOTICE:
Charger Voltage in Limits
STATUS: Normal
5. Event Log
I
1 0
Plus 80 UPS Communication