Three cabinet joining brackets are provided for securing each cabinet at the top
and bottom. Two flat brackets join the tops of the cabinets, one at the front and
one at the back. An angled bracket joins the cabinets at the bottom. Attach the
flat brackets to the cabinet tops first.
NOTE:
The remaining steps show how to join an optional cabinet to the right
side of the UPS, and Figure 15 shows the tight angle bracket for joining
the cabinet bottoms.
To
join
an optional
cabinet to the left side of the
UPS, use the same procedure, but use the
angle bracket.
Remove
the screw from the top door hinge of each cabinet. Align the holes in
bracket over the screw holes in the cabinet hinges, and replace the
screws (see Figure 14).
Two flat
go here
at
I
UPS
CABINET
(top view)
UPS
1
Angled bracket
here
(see Figure 15 on page 24)
Placement of
6.
Use the
method to install the second flat bracket over the screws at the
rear of the cabinet tops.
Plus UPS Installation
2 3
Summary of Contents for Plus 80
