SDRIVE 700
POWER ELECTRONICS
8
SAFETY INSTRUCTIONS
CAUTION
Install the drive on a non-flammable surface. Do not place flammable material
nearby.
Otherwise fire could occur.
Disconnect the input power if the drive gets damaged.
Otherwise it could result in a
secondary accident or fire.
After the input power is applied or removed, the drive will remain hot for a couple
of minutes.
Touching hot parts may result in skin burns.
Do not apply power to a damaged drive or to a drive with parts missing even if the
installation is complete.
Otherwise you may get an electric shock.
Do not allow lint, paper, wood chips, dust, metallic chips or other foreign matter
into the drive.
Otherwise fire or accident could occur.
WARNINGS
RECEPTION
The SDRIVE 700 is carefully tested and perfectly packed before leaving the
factory.
In the even of transport damage, please ensure that you notify the transport
agency and POWER ELECTRONICS: 902 40 20 70 (Interna34 96 136 65
57) or your nearest agent, within 24hrs from receipt of the goods.
UNPACKING
Make sure model and serial number of the variable speed drive are the same on
the box, delivery note and unit.
Each variable speed drive is supplied with a SDRIVE 700 technical manual.
