POWER ELECTRONICS
SDRIVE 700
CONFIGURATION REGISTER
115
13.
VARIABLE SPEED DRIVE:
SD700.
SERIAL
Nº:
MODEL:
APPLICATION:
DATE:
CUSTOMER:
NOTES:
To save parameters into the display: The SD700 can copy the drive configuration into the display to use at
a later stage if necessary. This allows the user to test different settings without losing current configuration
of the equipment, program multiple drives using one display, or to keep a copy of the drive configuration
for future commissioning requirements. To achieve this follow the steps described below:
Go into subgroup S1.10.
To memorize parameters into the display:
o
Set G1.10.1 UPLOAD=Y.
o
The display will show: UPLOADING…100%. Current parameter setting of the drive has
been stored into the display.
To transfer memorized data from display to drive:
o
Set G1.10.2 DOWNLOAD=Y.
o
The display will show: DOWNLOADING…100%. Memorized setting inside the display
will be transferred to the drive.
PARAMETERS
FACTORY SETTINGS
SETTING 1
SETTING 2
G1: Options Menu
1 LOCK PARMTRS=0
0 ___________________
___________________
2 PASSWORD_=OFF
OFF ___________________
___________________
3 PSW ERR=XXXX
XXXX ___________________ ___________________
4 LANG=ESPANOL
ESPANOL ___________________ ___________________
5 INITIALISE=0
0 ___________________
___________________
6 SHORT Menu=NO
NO ___________________
___________________
7 PROG = STANDARD
STANDARD ___________________
___________________
G1: Options Menu – S1.10: Eloader
UPLOAD=N
___________________
___________________
DOWNLOAD=N
___________________
___________________
G1: Options Menu
11 FAN CTRL=FIXE
FIXE ___________________
___________________
