POWER ELECTRONICS
SDRIVE 700
DESCRIPTION OF PROGRAMMING PARAMETERS
79
Parameter
Name /
Description
Range
Default
value
Function
Set on
RUN
9 GATEWAY A=0
G20.4.9
/
Gateway
address (A)
0 – 255
0
YES
10 GATEWAY B=0
G20.4.10
/
Gateway
address (B)
0 – 255
0
YES
11 GATEWAY C=0
G20.4.11
/
Gateway
address (C)
0 – 255
0
YES
12 GATEWAY D=0
G20.4.12
/
Gateway
address (D)
0 – 255
0
Setting of the Gateway address of the local network of the user.
This address is needed to the drive access to an external network.
This address must be provided by the network administrator of the
own user.
The format of the Gateway address is the following one: A.B.C.D.
Therefore, the setting of this address is realized by introducing a
value in each parameter that configures the complete address, this
is, by assigning a value to each one of the 4 parameters (from
parameter G20.4.9 to the parameter G20.4.12).
YES
13 MAC A=12
G20.4.13
/
MAC address (A)
0 – 255
12
YES
14 MAC B=34
G20.4.14
/
MAC address (B)
0 – 255
34
YES
15 MAC C=56
G20.4.15
/
MAC address (C)
0 – 255
56
YES
16 MAC D=78
G20.4.16
/
MAC address (D)
0 – 255
78
YES
17 MAC E=90
G20.4.17
/
MAC address (E)
0 – 255
90
YES
18 MAC F=171
G20.4.18
/
MAC address (F)
0 – 255
171
Setting of the MAC address. This address is unique and exclusive,
and is associated to the LAN board / drive. It must be provided by
Power Electronics.
The format of the MAC address is the following one: A.B.C.D.E.F.
Therefore, the setting of this address is realized by introducing a
value in each parameter that configures the complete address, this
is, by assigning a value to each one of the 4 parameters (from
parameter G20.4.13 to the parameter G20.4.18).
YES
