Potterton Gas condensing boiler, Installation, Operation And Maintenance Manual, Page: 69 / 136

Function Prog.
no.
Level
1) Standard value
Fan output/speed increase 9626 F 30: 214.3
40: 150.0
60: 98.9
80: 70.5
95: 65.0
115: 58.3
Fan output/speed Y-section 9627 F 30: 100.0
40: 100.0
60: 70.0
80: -30.0
95: 150.0
115: 140.0
*) kW-settings are approximate values. Exact values can for example are determined by the gas meter.
Info Option
The display of the information values depends on the operation status!
Fault message
Servicing message
Setpoint manual control
Controller stop nominal value
Boiler temperature
State heating circuit 1
State heating circuit 2
State heating circuit 3
State domestic hot water
State boiler
State solar
State solid fuel boiler
State buffer
State swimming pool
Year
Date
Time
Telephone customer service
1) Eu = End user; C = Commissioning; E = Engineer
Note: Parameters with the program numbers 1- 54 are individual parameters of
the operating unit and the room unit and may, therefore, be set differently on
both devices. All paramteres from programme number 500 onwards are stored on
the controller and, therefore, identical. The value changed last is the valid value.
8.4 Explanations for setting
table
In the following the individual parameters of the Paramount will be described.
8.5 Time and date
Time of day and date
(1 - 3) The control has a year clock with setting possibilities for time, day, month and
year. Time and date must be correctly set, so that the heating programs can oper-
ate to previously carried out programming.
Programming
396532 05.11 Paramount three 30-115 kW 69