Fig. 28: Example for two different sensor curves
y
flow
Function extension module
1/2/3
(6020 - 6022)
Specification of functions that are controlled by the extension modules 1 2 and 3.
Multifunctional
: For possible functions that can be assigned to the multifunction-
al inputs/outputs, see prog. no. 6030 to 6055.
Heating circuit 1
: For this use, the respective settings can be adjusted in the menu
point Heating circuit 1.
Heating circuit 2
: For this use, the respective settings can be adjusted in the menu
point Heating circuit 2.
Heating circuit 3
: For this use, the respective settings can be adjusted in the menu
point Heating circuit 3.
Solar DHW
: For this use, the respective settings can be adjusted in the menu point
Solar.
Primary controller/feed pump: For this use, the respective settings can be adjus-
ted in the menu point Primary controller/feed pump.
Relay output QX21-QX23
(6030 - 6038)
Relay outputs for the moduls 1, 2 and 3.
Explanations see prog.-no. 5890.
Sensor input BX21/BX22
(6040 - 6045)
Sensor input for the moduls 1, 2 and 3.
Functions in addition to the basic functions will be possible by configuring the
sensor inputs BX21 and BX22.
Explanations see prog.-no. 5930).
Function input H2 EM 1/2/3
(6046, 6054, 6062)
Explanations see prog.-no. 5950.
Contact type H2 EM 1/2/3
(6047, 6055, 6063)
Explanations see prog.-no. 5951.
Voltage values 1/2 H2 mod-
ule 1-3
(6049, 6051, 6057, 6059,
6065, 6067)
Function values 1/2 H2 mod-
ule 1-3
(6050, 6052, 6058, 6060,
6066, 6068)
The linear sensor curve is defined over two fixed points. The setting is made with
two parameter pairs for
Function value
and
Voltage value
(F1 / U1 and F2 / U2).
Programming
7308536-02 06.13
Condensing gas boiler Eurocondense three125-300 kW
113