Polon-Alfa POLON 4000 Series Operation And Maintenance Download Page 4

Page: 4 / 105

ID-E270-011GB

7.1 DETECTION ZONE ......................................................................................................................... 48

7.2 ADDRESSABLE ELEMENTS DECLARATION .................................................................................... 49

7.3 ASSIGNING ALARMING PARAMETERS TO ZONES ........................................................................ 49

7.4 EKS-4001 MONITORING AND CONTROLLING ELEMENTS DECLARATION .................................... 50

7.5 EWS-4001 MULTI-OUTPUT CONTROLLING ELEMENTS DECLARATION ........................................ 55

7.6 EWK-4001 MULTI-INPUT MONITORING ELEMENTS DECLARATION ............................................ 57

7.7 SAL-4001 ACOUSTIC SIGNALLING DEVICES DECLARATION .......................................................... 58

7.8 UCS 4000 UNIVERSAL CONTROLLING PANELS DECLARATION ..................................................... 61

7.9 UCS 6000 UNIVERSAL CONTROL PANELS DECLARATION............................................................. 65

7.10 TSR-4000 TERMINAL DECLARATION .......................................................................................... 68

8 FUNCTIONALITY DESCRIPTIONS ................................................................................................ 68

8.1 ALARMING ................................................................................................................................... 68

8.1.1 Alarm types ........................................................................................................................... 68

8.1.2 One-stage alarm (variant #1) ................................................................................................ 69

8.1.3 Two-stage alarm (variant #2) ................................................................................................ 69

8.1.4 One-stage alarm with single reset (40/60 sec.) of a fire warning device (variant #3) ......... 69

8.1.5 One-stage alarm with single reset (60 sec./8 min.) of a fire warning device (variant #4) ... 70

8.1.6 Two-stage alarming with single reset (40/60 sec.) of a fire warning device (variant #5) .... 70

8.1.7 Two-stage alarm with single reset (60 sec./8 min.) (variant #6) .......................................... 70

8.1.8 One-stage alarm with a coincidence including two fire warning devices (variant #7) ......... 70

8.1.9 Two-stage alarm with a coincidence including two fire warning devices (variant #8)......... 71

8.1.10 Interactive one-stage alarm (variant #9) ............................................................................ 71

8.1.11 Interactive two-stage alarm (variant #10) .......................................................................... 71

8.1.12 One-stage alarm with a group-time coincidence (variant #11) .......................................... 71

8.1.13 two-stage alarm with a group-time coincidence (variant #12) .......................................... 71

8.1.14 Two-stage alarm with a group-time coincidence to accelerate a 2

stage alarm (variant

#13) ........................................................................................................................................... 72

8.1.15 Two-stage alarm with initial zone reset and a group coincidence to accelerate a 2

stage

alarm (variant #14) ................................................................................................................... 72

8.1.16 Two-stage alarm with a coincidence including two fire warning devices to accelerate a

stage alarm (variant #15) .................................................................................................... 72

8.1.17 Two-stage alarm with initial zone RESET and a coincidence including two fire warning

devices to accelerate a 2

stage alarm (variant #16)............................................................... 73

8.1.18 One-stage alarm with temporary zone dis-actuation (variant #17) ................................... 73

8.1.19 Alarm with a manual call point (ROP) ................................................................................. 73

8.1.20 Alarming in the "DELAYS OFF" mode .................................................................................. 73

8.1.21 Alarming in the "PERSONNEL ABSENT" mode .................................................................... 73

8.2 FAULTS SIGNALLING..................................................................................................................... 74

8.2.1 Fault types ............................................................................................................................ 74

8.3 TESTING ....................................................................................................................................... 76

8.3.1 TSO-4900 board signalling elements testing ........................................................................ 76

8.3.2 Testing fire line elements in zone ......................................................................................... 76

8.3.3 EKS-4001 monitoring and controlling elements testing ....................................................... 77

8.3.4 EWS-4001 multi-output controlling elements testing .......................................................... 77

8.3.5 EWK-4001 multi-input monitoring elements testing ........................................................... 77

8.3.6 SAL-4001 acoustic signalling devices testing ........................................................................ 77

8.3.7 Line elements location .......................................................................................................... 77

8.4 SYSTEM ELEMENTS DISABLEMENT/RE-ENABLEMENT ................................................................. 77

8.4.1 Fire warning devices and zones disablement/re-enablement ............................................. 77

8.4.2 PK relays disablement/re-enablement ................................................................................. 78

8.4.3 LS signalling lines disablement/re-enablement .................................................................... 78

Summary of Contents for POLON 4000 Series










































































































Search results

Summary of Contents for POLON 4000 Series

Reviews:

Related manuals for POLON 4000 Series

Brands by name

Popular brands

Polon-Alfa POLON 4000 Series, Operation And Maintenance

Search results

Summary of Contents for POLON 4000 Series

Reviews:

Related manuals for POLON 4000 Series

Brands by name

Popular brands