40
ID-E270-011GB
FIRE ALARM WITH TUN-4046 !
L-1 E-98 ZONE-25
CONFERENCE HALL
2ND FLOOR
2007-01-30 17:20:00
** 1ST STAGE FIRE ALARM! **
2007-01-30 17:20:00
ACKNOWLEDGEMENT !
2007-01-30 17:22:30
----- ALARMU RESET -----
2007-01-30 17:25:17
The printer is equipped with a thermal paper roll (width 80 mm and max. diameter
Ø 50 mm).
At the back of the printer on a panel, there are two monostable push buttons located (PAPER and
RESET) used for the following operations:
-
printer paper out feed using the PAPER push button;
-
printer test: press PAPER and RESET buttons simultaneously; next, release the RESET button;
next, after 1 second, release the PAPER button;
-
printer controller restart after pressing the RESET push button.
In order to replace a paper roll:
-
use lever 1 to open the printer mechanism;
-
replace the used roll with a new one on the holder;
-
insert the paper into the printer mechanism guide slit so that the thermo-sensitive surface is
visible while inserting it into the printing mechanism guide slit;
-
use lever 1 to close the printer mechanism;
-
press PAPER to pull the paper into the mechanism.
