Safety principles
Prior to commencing the installation of the product it is obligatory to become thoroughly familiar with all the information
included in this user manual. It is indispensable to adhere to the guidelines provided strictly and to keep this document for
the whole duration or product use.
If the recommendations regarding installation are not followed, this may lead to grievous bodily harm or material losses.
POLARGOS is not liable in such cases.
This device is not intended for use by persons (including children) whose physical, sensory, or mental capabilities are
limited, or by persons who lack proper experience of knowledge, unless they are capable of using the device through a
supervising person responsible for their safety or thanks to the previous received instructions regarding operation of the
device.
Make sure that no children play with the fixed control devices. Place the remote control transmitters beyond the reach of
children.
In the even of using a switch without a lock***, check whether other people are located in appropriate distance from the
gate.
Disconnect the power supply of the device during cleaning or performance of other maintenance activities if the device is
controlled automatically.
Prior to installing the drive it is necessary to check whether the driven part is in good technical condition, balanced
properly, and opens and closes properly.
Make sure to maintain appropriate distance from the zone located between the driven part and the immobile elements
located nearby, in view of the danger related to movement of the driven part during opening (crushing, shearing, seizing).
Monitor the gate visually while it moves.
All the switches without a lock*** have to be located at a place from which the driven part will be directly visible, but in
appropriate distance from moving elements. They have to be installed at the height of at least 1.5 m, at a location where
they will not be generally available, except for the switches that require using a key.
Maintain the distance of 500 mm from the back of each wing when the gate is fully open.
Do not discard the worn device or batteries together with household waste. The user is obligated to provide all the
waste electronic and electrical equipment to a special waste collection point for recycling.
POLARGOS declares hereby that the product complies with the fundamental requirements and other applicable provisions of
the Directive 1999/5/CE. The declaration of conformity is available at the online address
The product has been approved for use in the European Union and in Switzerland.
***examples: intercom, key switch, digital code panel, etc.
It is necessary to check the following monthly:
-
the system, for the purposes of detecting all the signs of wear or damage to cables or installation components.
-
whether the drive assembly changes the direction of functioning once the gate encounters a 50 mm obstacles located in the middle of
the gate wing height.
Do not use the drive assembly if it requires repairs or adjustment. Any gates that are in poor technical condition need to be repaired,
reinforced, or even replaced.
Use only the original parts for servicing and repairs.
