1. Press and hold for 2 s the
button of the
electronic control
system. The
status
light becomes lit.
2. Put the remote control
device on the dial of the
electronic control system.
3. Hold the pressed button No. 1
of the remote control device
until the status light
starts
flashing.
4. Push the button No. 1 of the
remote control device once. The
“RESET” status light flashes.
5.
In order to delete the settings*
Hold the pressed button No. 2 of the remote control device until
the “RESET” status light is lit.
6.
In order to delete the settings* of the remote control
devices/control points stored in the memory
Hold the pressed button No. 2 of the remote control device until
all the status lights are lit.
7. The
status light flashes twice (see “Automatic learning of the gate travel path”, page 34).
Locking / unlocking of drives
After the drives are unlocked, the gate can be moved manually in the event of an electronic malfunction.
1. Unlocking of drives
Disconnect the unlocking element and then remove the
actuator from the bracket fixing the wing.
2. Locking of drives
Install the actuator. Fix the unlocking element to the drive
mandrel in order to lock the mandrel.
