Cabling of accessories
Due to safety reasons these activities have to be performed with the power supply disconnected.
It is recommended to perform automatic learning of the gate travel path before connecting accessories (photocells, orange
light, etc.)
Photocells / Intelligate gate
The photocells enable stopping or changing the movement direction of the gate in the event of
detecting an obstacle.
It is possible to install a set of photocells. Each set of photocells includes:
•
a transmitting photocell (TX),
•
a receiving photocell (RX).
Placement of photocells
In order to facilitate the installation cables, located the
receiving photocell on a post featuring the drive fitted with
an electronic system.
Before connecting the photocells it is necessary to remove the wire (clamp) located between terminals 3 and 4 of
the electronic module.
