In order to close the gate, it is
necessary to push the «Down» button of the remote control
device.
Method of using a remote control device with 3 buttons
Opening
Stop
Closing
In order to open the gate fully, it is necessary to push the «Up» button of the remote control
device.
In order to stop the gate while it moves, push the middle button of the remote control device.
A remote control device with 3 buttons may not be used for changing the drive settings.
Adding a remote control device
Remote control device with 2 or 4 buttons
1. Press and hold for 2 s the button of
the electronic control system. The
status light becomes lit.
2. Put the remote control device on the
dial of the electronic control system.
3. Press shortly the remote control device
button intended for programming. The
“RADIO” status light becomes lit and then it
goes out once the remote control device
button is released.
In that button, the full opening mode has been
programmed.
Remote control device with
3
buttons
1. Press and hold for 2 s the button of
the electronic control system. The
status light becomes lit
2. Put the remote control device on the
dial of the electronic control system.
3. Press shortly the remote control device button
intended for programming. The “RADIO” status
light becomes lit and then it goes out once the
remote control device button is released.
The remote control device has been stored in the
memory.
Deletion of remote control devices - see pages 47-48.
